A dip switch is located on the back of the unit under a removable cap. Use the following dip switch settings to confugre the time displayed: TIME ZONE SYSTEMS (TZA) FUNCTION DIP Switches 1, 2, 3, & 4 ...
For changing the baud rate of your sign you must refer to your customer documentation to first see if changing the baud rate is possible. If it is possible you will find instructions on which dipswitc...
The SR2 designation in the part number means the model will accept ONLY RS422/RS485 serial input from a PC or other device. An RS232 to RS422/485 data converter IS REQUIRED to communicate to the displ...
The Net Jet Ethernet device (Part Number ED2160) controls our EDV product line of message signs. A .PDF document is available to download that will explain how to find the IP address and change it if ...
So all you see is the Address and baud rate read out message after you send your message. To solve this problem try the following (when using a scrolling message sign). 1) Verify your connection to th...
Refer to pages 5-189 to 5-192 of the RLL section on the DL06 user manual for the “PRINT†instruction that will send data out the port 2. The procedure should be: 1) Using DirectSoft32 – choose t...
EDI offers enclosures rated at NEMA1/NEMA12/NEMA4 and NEMA4X. Panel-mount models are available also. NEMA1 - Designed for standard environments. Clean-rooms, dust, dirt-free areas. NEMA12 - Designed f...
EDI offers a standard one-year limited warranty on all indoor-rated products. A standard five-year limited warranty is offered on all outdoor-rated products. Base two-year extensions can be purchased....
Our LED displays are programmed using Windows-based software. Protocol to communicate to the displays is provided for the user to create their own program for communication. Simple ASCII protocol is s...
See the attached wiring diagram. It will explain the wiring for most photosensor devices. Our standard LED model requires a 10 to 30VDC, NPN-type transistor, momentary photosensor. When activated, the...