How can I switch the display time on time zone systems (TZA)?

A dip switch is located on the back of the unit under a removable cap. Use the following dip switch settings to confugre the time displayed:

TIME ZONE SYSTEMS (TZA) FUNCTION DIP
Switches 1, 2, 3, & 4 are used for Time Zone Adjustments (add all values)


• 1 ON adds or subtracts 1 hour
• 2 ON adds or subtracts 2 hours
• 3 ON adds or subtracts 4 hours
• 4 ON adds or subtracts 8 hours

Switch 5 (30 Minute Time Zone)
ON = 30 MINUTES WILL BE ADDED OR SUBTRACTED BASED ON SWITCH
8
OFF = THER WILL BE NO 30 MIN ADDITION OR SUBTRACTION.

Switch 7 is 12/24- hour select
7 ON = 12-hour mode
7 OFF = 24-hour mode

Switch 8 is used to select ADD or SUBTRACT Time Zone Adjustment
8 ON = SUBTRACT switches 1 through 4
8 OFF = ADD switches 1 through 4

Switches 1 & 2 are used to control baud rate (not to be changed)
• 1 OFF & 2 OFF = 1200 baud
• 1 ON & 2 OFF = 2400 baud
• 1OFF & 2 ON = 4800 baud
• 1 ON & 2 ON = 9600 baud
•
Switch 6 is not used.