
How to upgrade the software on the sign:

1. Run "Wzp2006\bin\Wzpsoft.exe"
2. Select menu "Comm|Setup Comm", select the correct com port and baud rate
3. Select menu "Comm|Install OS & Fonts", select the file "Wzp2006\bin\lmos.sys", press OK

How to use the traditional fonts (SS7,SF7,...) in Wzp2006 LED Center:

1. Install the fonts "cstsans.fon","cstserif.fon" or "cstfixed.fon" on your Windows system (click "Start"->"Control Panel")
2. Run the Wzp2006 LED Center, select the font name and size:
   Traditional Font	Font Name		Font Size
	SS5		CST Sans Serif	   	5
	SS7		CST Sans Serif	   	6
	SF7		CST Serif	   	6
	SS8		CST Sans Serif	   	7
	SF8		CST Serif	   	7
	SF10		CST Serif	   	8
	SS15		CST Sans Serif	   	12
	SF15		CST Serif	   	12
	SS16		CST Sans Serif	   	13
	SF16		CST Serif	   	13

Release Notes:

v1.64		19 Jul 2008

  1. Add surpport for CLEAR jumper (JP1) to reset the controll board to original states. Set the jumper on JP1 to pin2-3 and power on reset the control board, the control board files system will be reformated, and all configurations are set to default values: address 1, group 1, baud 9600, width 128, height 32...

  2. when new message received and restart, the display will not blank now, and old message will move out while new message moving in.

  3. Fixed the problem that the sign can not response quickly when new message received and restart


v1.63		14 Jul 2008
  
  1. Add new configure option "Enable No COMMS warning". A warning message "No COMMS" will display when the communication stoped for 60 seconds, it tell people whether the display is still under control.

  2. Add new configure option "Var A Size" for MCS protocol. Like default text file A, the system can automatically create a variable file A.

  3. Add support for new protocol WRL2.0, which provide more reliability then WRL1.x.

  4. Fixed the problem when writing a file and the new file content is smaller then the old one, it may cause the file system crashed.

  5. Fixed the problem that the sign can not quickly response when sending files which will cause restart.


v1.62		11 Jun 2008

  1. Add surport to print .lmt text file on paper


v1.61		3 Jun 2008

  1. Add new configure option "No data retention during power down"
  2. Add new configure option "quick mode (no shakehands)" for MCS protocol


v1.60		4 May 2008
  1. All tasks can "SLIDE" or "ROTATE" smoothly in parallel
  2. There is no need to reconfig the sign after reformatted (but still should reinstall fonts)

v1.51		14 Apr 2008
  1. Add report installed MCS fonts to sign info

v1.50		18 Mar 2008
  1. Support "Rotate" display mode for rotate a large continuous message
  2. Support "Sequence" to let tasks run in queue
  3. For WZPMAIN01 board, please upgrade to v1.34

v1.40		28 Feb 2008
  1. Support new control board WZPMAIN03. Do not try to update firmware to v1.40 or higher version to WZPMAIN01 board.

v1.33		16 Feb 2008

  1. Fixed the problem that schedule may work wrong
  2. Fixed the problem when running at temperature higher than 55 degree

v1.32		11 Dec 2007

  1. Support duplicating frame settings to other frames in rdf editor.
  2. Fixed the losing file bug when sending a lots of file.

v1.31		10 Nov 2007
  
  1. Fixed the "not enough memory" problem when using large font to display time, temperature, decounter or incounter.

v1.30		24 Jul 2007

  1. Upgrade the Flash Disk File System to LMFS 3. Greatly improved the data storage reliability.

v1.24		5 Jul 2007
  1. Change default text alignment of position "L" to left-align and "R" to right-align.

v1.23		21 Apr 2007
  1. Add support to configure the MCS protocol timeout. Default value is 0. You can use the HyperTerminal to test the MCS protocol now.
  2. Add support to disable System beep.

v1.22		26 Mar 2007
  1. Add support for cutsom fonts with MCS protocol

v1.21		8 Jan 2007
  1. Add support for TCP/IP network
  2. Make the infomation show on startup configurable
  3. Make the sign's brightness configurable
  4. MCS: Make the size of Text A configurable

v1.20		21 Nov 2006
  1. Add display methods: Interlaced Slide, Interlaced Roll, Jump, Snow, Shoot, Explode, Twinkle, Pac Man
  2. Support MCS protocol v1.10

v1.10		10 Oct 2006
  1. Add support for saving image files as gif and png format
  2. Add support for creating gif animation

v1.00		26 Sep 2006
  1. First release
  2. Support MCS protocol v1.00
